List of products by brand Kong

Kong Argon S screw gate
€10.40
€12.20 -€1.80
Tax included
available
Argon is a carabiner dedicated to people who seek extreme lightness and the slightest dimensions. Designed for better rope glide, to ensure good positioning of belay devices and shape adapted for easy tying and untying of a clove hitch. Wider rope contact surfaces for reduced wear on the carabiner. The D shape transfers the majority of the load onto the spine, the carabiner strongest axis. The asymmetric shape, furthermore, is ideal for connecting belay or rappel devices or for use at the end of a lanyard. The screw sleeve is recommended for dirty environments, where other spring-loaded sleeve may jam due to dirt.
Kong Back up
€114.00
€134.00 -€20.00
Tax included
available
BACK-UP is the revolutionary KONG fall arrester that follow the operator in both directions and stop the possible falling.Shifting the special button on the lock mode, it can be used also as a positioning device or a normal locking device.Due to its special manufacture, BACK-UP supports also the strongest stress in semi dynamic way avoiding  the shocking effects on the ropes caused by the traditional self-locking devices with toothed cams.It works also with NO-CUT LANYARD Ø 12 if used according to EN 567 and UIAA 104. Connector Ovalone Carbon Twist Lock included.High quality, made in Italy!   
Kong Duck
€47.00
€55.00 -€8.00
Tax included
available
Duck, the innovative emergency rope clamp. Conceived for single ropes with a diameter between 8 and 13 mm, Duck is the first and only belay device that works also on plane and tubular slings from 10 to 15 mm width (even if these are not certified for progression). Due to the small dimensions, it can be easily inserted even with one only hand. The big hole allows the rotation of sleeve connectors. Duck is born like an emergency rope clamp for retrieve, self-belay, progression manouvres and for regulations of daisy chains.High quality product, completely conceived and produced in Italy!  
Kong Eagle Speleagle
€53.50
€63.00 -€9.50
Tax included
available
Innovative compact stainless steel hammer with lightweight head, specifically designed for mountaineering, caving, rescue and equipping. It can be used to tighten 13 and 17mm nuts. Fitted with an ergonomic rubber handle and 10mm tape for a safe handing.Awarded at Industry Award in 2009.The compact size makes it perfect for equipping works in caving situations.
Kong Ergo KL screw sleeve
€11.80
€13.80 -€2.00
Tax included
available
Compact and lightweight carabiner, with a high tensile strength.The particular shape makes it suitable to be handled more easily by people with small hands, like women or children. Improved opening and capabilities thanks to the bent D-shaped Slim profile for a small footprint Keylock system High quality product completely developed and manufactured in Italy Tested piece by piece
Kong Ferrata Express screw sleeve
€11.95
€13.95 -€2.00
Tax included
available
Aluminum carabiner with Express sleeve and Keylock system. The most classic carabiner for via ferrata and adventure parks. Its special shape allows a large opening and a good grip. Express sleeve: to open the carabiner must lower the sleeve and then pull the gate.It is normally used mounted on a lanyard or via ferrata set. Improved opening and capabilities thanks to the D-shaped bent Keylock system High quality product completely developed and manufactured in Italy Tested piece by piece
Kong Genius
€85.00
€99.95 -€14.95
Tax included
available
Resistant carriage and hauling bag, fitted with large reinforced loops for suspension.The comfortable and foldaway shoulder straps avoid any entanglement during lowering and recovery operations.The oblique cut of the upper part allows to keep the bag open through the special hanging eyelet.Fitted With practical inner pockets.
Kong Guide Alu screw sleeve
€11.40
€13.40 -€2.00
Tax included
available
Aluminum carabiner light and high load, with screw sleeve and Keylock system. The D shape transfers the majority of the load on the main axis of the carabiner, which is the most resistant. The asymmetric shape is also ideal for belay systems. The screw sleeve allows to have a safer closing of the gate, and also makes it suitable for professional use. Usefull for use during bolt belay. Heavy load Keylock System High quality product completely developed and manufactured in Italy Tested piece by piece
Kong Hand Futura
€59.00
€69.00 -€10.00
Tax included
available
A revolutionary rope clamp for its extremely tiny dimensions (only 125g) and ergonomic shape. Its small size allows the users hand to sit comfortably inside the device, close to the rope in the same way as you would grabbing the actual rope. Comes with two different sized handles for ergonomic customisation. Available in right and left versions. The best support  to ascend a rope with the "ROPE WALKING SYSTEM" (as if climbing a ladder). After testing the system, cavers confirm an excellent performance and a 30%-efficiency's  increase during the ascent. Fitted with anti-overturning system of the cam.High quality, made in Italy!Patented. 
Kong HMS Napik screw sleeve
€11.95
€12.95 -€1.00
Tax included
available
Aluminium connector with screw sleeve and Keylock system. The classic wide pear shape makes it suitable for belay with clove hitch. Can be used with all anchoring and belaying systems. Screw sleeve makes it suitable for professional use.More compact and lighter than the traditional HMS and with a higher tensile strength.Equipped with Keylock system that prevents any snagging with the rope and in the bolts.High quality product completely developed and produced in Italy.Tested piece by piece.
Kong Indy Evo
€110.00
€129.95 -€19.95
Tax included
available
Indy Evo is a manually operated descender device with double autolocking system, that locks both when the lever is released or when it is pressed. INDY EVO is also a descender device (conform to EN 12841 type C) for working rope and it allows a descent at a controlled speed and stop at any time, hands free, on a static rope (EN 1891) or dynamic rope (EN 892). Light weight and compact size, long life guaranteed by the stainless steel cams and low maintenance make it a working tool very appreciated by the industry. Certified for two people, it allows the lowering of two people at the same time. It allows to take in slack the rope.High quality product, made in Italy!
Kong Large Multiuse KL
€9.00
€10.50 -€1.50
Tax included
available
Light alloy carabiner with straight gate and wide opening. The particular D shape prevents the rotation of the carabiner and allows to distribute the load along the major axis.Equipped with Keylock system that prevents any snagging on the rope and in the bolts.High quality product completely developed and produced in Italy.Tested piece by piece
Kong Large Multiuse twistlock
€12.35
€14.50 -€2.15
Tax included
available
Light alloy carabiner with wide opening. The particular D shape prevents the rotation of the carabiner and allows to distribute the load along the major axis.Equipped with Keylock system that prevents any snagging on the rope and in the bolts.Fitted with Twist Lock sleeve, easy to handle even wearing gloves.2 movements: to open the carabiner turn the sleeve and pull the gate.High quality product completely developed and produced in Italy.Tested piece by piece
Kong Lift
€49.50
€58.00 -€8.50
Tax included
available
Rope clamp for rope access. Excellent ability to block out particularly on muddy and icy ropes thanks to the holes on the cam and on the side plate. The new material and a special chemical and thermal process give to the cam, in addition to black color, a much higher surface hardness. The result is a great wear resistance and a reduction of the fragility that usually penalizes steels by quenching to low temperatures. New opening lever, ergonomic, easy to handle and protected from shocks and from the risk of accidental opening.Fitted with anti-overturning system of the cam.
Kong Oval Alu Classic screw sleeve
€10.20
€12.00 -€1.80
Tax included
available
Oval aluminium carabiner with a circular section which makes it recommended for use with mobile devices (pulleys, blockers, fall arresters ...).Equipped with screw sleeve which makes it also suitable for professional applications.Keylock system that prevents any accidental entanglement in rope or anchor point.High quality product completely developed and produced in Italy.Tested piece by piece.
Kong Panic
€25.50
€29.95 -€4.45
Tax included
available
Panic allows an easy catch of the most distant anchoring points. Panic is fitted with a tubular webbing with an inner flexible bar that allows to obtain the required bent and a special connector equipped with an ingenious system that keeps open the gate until it comes into contact with the fix plate. At this point the mechanism releases the gate and the connector closes automatically. The mechanism prevents accidental opening of the lever when it is under load. Standard version (30 cm lenght).
Kong Panic XL
€31.50
€37.00 -€5.50
Tax included
available
Panic allows an easy catch of the most distant anchoring points. Panic is fitted with a tubular webbing with an inner flexible bar that allows to obtain the required bent and a special connector equipped with an ingenious system that keeps open the gate until it comes into contact with the fix plate. At this point the mechanism releases the gate and the connector closes automatically. The mechanism prevents accidental opening of the lever when it is under load. XL version (45 cm lenght).
Kong quickdraw Ergo Anniversary 5 pcs
€50.50
€59.00 -€8.50
Tax included
available
The Ergo Anniversary quickdraw is a new edition that celebrates Kong's 40 years (1977-2017).The set is composed of 5 vivid colours that not only recall the pop style of those years, they also make it really easy to give beta once they’re placed on a route.Equipped with two super strong Ergo connectors with a great handling shape, a generous size that’s easy to clip and a Keylock nose.The Dyneema sling is 13mm by 12cm, with the new ultra-resistant Fast Rubber made of silicone.Highest quality product completely developed and produced in Italy and tested piece by piece - meaning every single carabiner is pull-tested!
Kong quickdraw Trapper Anniversary 5 pcs
€42.50
€50.00 -€7.50
Tax included
available
The Trapper Anniversary quickdraw is a new edition that celebrates Kong's 40 years (1977-2017).The set is composed of 5 vivid colours that not only recall the pop style of those years, they also make it really easy to give beta once they’re placed on a route.Equipped with two Trapper connectors with a nice handling shape, standard size that’s durable but not too heavy and an easy to clip Keylock nose.The Dyneema sling is 13mm by 12cm, with the new ultra-resistant Fast Rubber made of silicone.Highest quality product completely developed and produced in Italy and tested piece by piece - meaning every single carabiner is pull-tested!
Kong Set Ferrata KKE
€62.00
€75.00 -€13.00
Tax included
Non disponibile
Hybrid via ferrata set, with elastic arms that reduce its size and the risk of snagging. Shock absorber plate with rope that allows you to tackler via ferrata more safely. Fitted with aluminum Tango connectors, double safety gate, tubular webbing with inner elastic and heavy load stitching. The shock absorber plate can be easily inspected thanks to the convenient Velcro bag. High quality product designed and manufactured in Italy. Tested piece by piec
Kong Tango
€18.00
€19.95 -€1.95
Tax included
available
Aluminium connector with screw sleeve and Keylock system. The classic wide pear shape makes it suitable for belay with clove hitch. Can be used with all anchoring and belaying systems. Screw sleeve makes it suitable for professional use.More compact and lighter than the traditional HMS and with a higher tensile strength.Equipped with Keylock system that prevents any snagging with the rope and in the bolts.High quality product completely developed and produced in Italy.Tested piece by piece.
Kong Trapper straight gate
€9.00
€10.50 -€1.50
Tax included
available
Designed for climbing and for use on quickdraws. The straight gate allows an easy clipping on the bolts. The contact surfaces are wider to reduce wear and improve the passage of the rope. The D shape transfers the majority of the load on the main axis of the carabiner, which is the most resistant.High quality product completely developed and produced in Italy. Tested piece by piece.